Skid Steer Loader Models — Browse All Makes & Manufacturers

Type the model name, series, or manufacturer directly into the search bar at the top of the page. You can also browse from the skid steer loader category page and apply filters for manufacturer and year to narrow results to machines that match your requirements.

No. All listings and model specification pages are open to browse without registering. An account is only required when you want to contact a seller, save a listing, or access additional buyer tools.

Rated operating capacity – ROC – is the load a skid steer can carry in its bucket at 35 percent of its tipping load, which is the industry-standard safety margin for stable operation. A machine with a 900 kg ROC can safely handle loads up to that weight without approaching the tipping threshold. Attempting to carry loads above the ROC is both unsafe and mechanically damaging – it stresses the lift arm, drive motors, and frame beyond their design limits. ROC is the primary specification for matching a skid steer to its intended application: buyers who regularly handle heavy, dense materials need to prioritize ROC over other specifications.

Skid steers use rubber tyres and steer by differentially braking or powering the left and right drive wheels – an arrangement that delivers high maneuverability on hard surfaces but creates ground disturbance on soft or sensitive ground. Compact track loaders replace the tyres with rubber tracks, dramatically reducing ground pressure and improving traction in soft, wet, or uneven conditions while reducing the ground scarring that tyre-based skid steering causes. The trade-off is higher acquisition cost, more complex undercarriage maintenance, and slightly reduced top speed. For operations that work primarily on hard surfaces, a skid steer is typically the more cost-effective choice. For soft ground, slopes, or ground surface-sensitive sites, a compact track loader justifies its premium.

Universal skid steer quick attach – sometimes called the Bob-Tach or universal plate – is the most widely used attachment mounting standard in the industry and provides the broadest compatibility with aftermarket attachment suppliers. Older machines may use proprietary mounting systems that limit attachment choices and increase the cost of adding new capabilities. Buyers who plan to run multiple attachment types should verify that the machine uses a universal or widely supported quick attach standard before purchasing, as the attachment ecosystem available for the machine directly determines its long-term versatility and resale value.

Most skid steers use a hydrostatic drive system with two independent hydraulic motors driving the left and right sides of the machine. The condition of the hydrostatic pumps and motors is the most important drivetrain assessment on a used skid steer – worn pumps deliver reduced drive speed and tractive effort, and a machine that drives noticeably slower than its specification or shows significant speed difference between left and right sides has pump or motor wear that will require repair. Drive chain condition on chain-drive machines is a related wear point that should be inspected and adjusted or replaced as necessary.

A well-maintained skid steer from a major manufacturer can productively accumulate 5,000 to 8,000 hours before requiring major component rebuilds, and many machines in light to moderate duty exceed 10,000 hours with consistent maintenance. The application makes a significant difference: a machine used in heavy demolition, rock handling, or concrete work will reach rebuild thresholds faster than one used in landscaping or light site cleanup at the same hour count. Buyers evaluating a high-hour used skid steer should assess application history as carefully as the hour meter, and request service records to verify that the maintenance discipline matches the hours claimed.