A combine more than 10,000 km away
A contract harvesting company in Ismailia Governorate needed a high-capacity rotary combine before the April wheat harvest. It found a 2012 Case IH 8120 Axial-Flow combine on a private farm near Albany, Georgia, listed on JumboBee.
The buyer submitted an offer through JumboBee, agreed a price with the seller, and paid $139,500 for the combine and a 30-ft grain header. International transportation was coordinated by Atlantic Project Cargo. The machine reached the buyer’s location near Ismailia 38 days after pickup in Georgia.
The listing price was only the starting point. Before committing, the buyer had to weigh the machine’s condition, its distance from a US port, its size on a ship, and what Egypt requires at arrival. The cheapest used Case IH 8120 for sale is not always the cheapest one to own in Egypt.
What the buyer needed
The buyer harvests about 4,500 feddans of wheat each April to May and 2,000 feddans of maize each August to September for growers on reclaimed land in Ismailia Governorate. Its fleet was two older conventional combines that struggled to keep pace at peak.
The company set four requirements:
- A single-rotor combine able to run a 30-ft grain header.
- Under 2,800 engine hours, with service history available.
- A total cost of under $175,000 delivered to its base near Ismailia, before duties and taxes.
- On site by mid-March 2026, ahead of the wheat harvest.
Used rotary combines of this size rarely appear on the local market, and the few on offer did not meet the hours limit. The US used market offered dozens of Case IH Axial-Flow machines in the right range, so the buyer searched there first.

How a New Zealand Buyer Purchased a John Deere X9 1100 in the USA
This case study shows what any international buyer should check before buying a US combine.
The machine: Case IH 8120 near Albany, Georgia

The machine was a 2012 Case IH 8120 Axial-Flow combine sold by a private farm in Dougherty County, near Albany, Georgia, with a matching 30-ft grain header.
| Specification | Actual machine |
|---|---|
| Manufacturer | Case IH |
| Model | 8120 Axial-Flow |
| Equipment type | Self-propelled single-rotor combine |
| Year | 2012 |
| Engine hours | 2,460 |
| Rotor (separator) hours | 1,790 |
| Location | Dougherty County, near Albany, Georgia |
| Condition | Used, operating; service records and walk-around video reviewed December 2025 |
| Included equipment | Case IH 2020 30-ft flex grain header, AFS Pro 600 display, yield and moisture monitor, straw chopper |
| Seller type | Private farm |
| Asking price | $148,500 |
| Purchase price | $139,500 |
For model background, see the Case IH 8120 specifications, along with Case IH 8120 reviews and Q&A.
Why this Case IH 8120 fit the buyer
The buyer compared seven Case IH 8120 and 7120 listings across Georgia, Kansas, Nebraska and Illinois. This one won on four points.
The model suited the work. The 8120’s single-rotor Axial-Flow design handles both dry wheat and maize with a header and concave change, which matched the buyer’s two-crop season.
The hours were low for the year. At 2,460 engine hours, the machine sat well under the buyer’s 2,800-hour limit. The 1,790 rotor hours pointed to moderate threshing wear.
The header came with it. A matching 30-ft flex header saved a separate search and fitted the buyer’s wheat fields near Ismailia. The buyer already owned maize heads it could adapt.
The location kept freight down. The farm sits about 195 miles from the Port of Savannah. Similar listings in Kansas and Nebraska were 600 to 1,000 miles from a suitable export port, which would have added roughly $3,000 to $4,000 in inland transport.
View more Case IH equipment for sale.
Browse Used Case IH Combines
Explore new or used construction and farm equipment available now.
Evaluating the purchase before committing
The cheapest listing is not necessarily the cheapest machine to buy internationally. Before making an offer, the buyer worked through this checklist.
| What to check | Why it matters | What the buyer found |
|---|---|---|
| Year | Sets the comparison group for price | 2012, late in the 8120 run |
| Engine and rotor hours | Main wear indicator on a used combine | 2,460 engine / 1,790 rotor |
| Rotor, concaves and grates | Worn threshing parts are costly to replace | Concaves replaced in 2023, per seller’s service records |
| Feeder house and chains | Wear affects feeding and capacity | Feeder chain within service limits |
| Tires and final drives | Expensive to replace abroad | Drive tires at about 60% tread |
| Hydraulics and engine | Leaks or faults delay loading and use | No leaks noted; oil analysis clean |
| Included equipment | Defines what is being bought | 30-ft grain header, display, chopper |
| Running condition | A non-runner is harder to load | Used, operating; drives on and off a trailer |
| Dimensions and weight | Decides trailer type and ocean equipment | About 36,000 lb; 12 ft 10 in wide and 13 ft 4 in tall without header |
| US location | Drives inland transport cost | About 195 miles to Savannah |
| Destination requirements | Can add cleaning, documents, inspection | Checked before the offer (see below) |
| Shipping estimate | Shows if the deal works at all | Ran the JumboBee shipping estimate first |
The buyer asked the seller for walk-around video, close-ups of the rotor and concaves, and service records before bidding. A machine’s location, condition, dimensions and destination can change the real purchase cost as much as the asking price.

How to Inspect Used Heavy Equipment Remotely: Practical Checklist for International Buyers
This article provides a practical, step-by-step guide for evaluating machinery without physical access.
What did the purchase actually cost?

The combine and header cost $169,200 delivered to the buyer near Ismailia, before Egyptian duties and taxes. The machine itself was 82% of that figure.
| Cost component | Cost (USD) |
|---|---|
| Equipment purchase price (combine + 30-ft header) | $139,500 |
| US inland transport, Albany to Savannah (combine and header) | $5,500 |
| Export preparation and cleaning | $3,400 |
| Ocean freight, Savannah to Alexandria (two 40-ft flat racks) | $15,600 |
| Destination port charges, clearance and delivery to Ismailia | $5,200 |
| Cost delivered near Ismailia, before duties and taxes | $169,200 |
This is not a landed cost. Import duties and taxes were paid separately by the buyer through its customs broker and are not included.
The principle is simple:
Purchase price + US inland transport + preparation + international shipping + destination costs = real acquisition cost
The buyer’s first offer of $134,000 came after running a shipping estimate. Knowing transport would add roughly $30,000 let the buyer set an offer that kept the total under its $175,000 ceiling.
From purchase in Georgia to delivery in Egypt

The seller accepted the buyer’s counter-offer on 8 January 2026, and the sale was confirmed two days later. The combine was collected on 13 January and reached the buyer near Ismailia on 20 February, 38 days after pickup. International transportation and export logistics were coordinated by Atlantic Project Cargo.
- Pickup near Albany. The header was detached and the unloading auger folded before pickup. The combine moved about 195 miles to Savannah on a lowboy under an oversize-load permit, with the header on a header trailer.
- Export preparation. At a preparation facility near the port, the grain tank and augers were emptied and the machine was blown out and pressure-washed, then photographed for the file.
- Ocean freight. The combine and header shipped on two 40-ft flat racks from Savannah to Alexandria, with one transshipment in the Mediterranean. Transit took about 24 days.
- Arrival and clearance. The buyer’s broker cleared both units at Alexandria in four days, with no additional document requests or port storage charges.
- Final delivery. The combine was trucked about 125 miles to the buyer’s location near Ismailia.
| Project detail | Information |
|---|---|
| Equipment | Case IH 8120 Axial-Flow combine + 30-ft grain header |
| Equipment location | Dougherty County, near Albany, Georgia |
| Purchase market | USA |
| Buyer | Contract harvesting company, Ismailia Governorate, Egypt |
| US port | Savannah, Georgia |
| Destination port | Alexandria |
| Final destination | Near Ismailia, Ismailia Governorate |
| Ocean shipping | Two 40-ft flat racks |
| Logistics partner | Atlantic Project Cargo |
| Pickup to delivery | 38 days |
For the full logistics story, see how the Case IH 8120 was shipped from Georgia to Egypt, or read more about international agricultural equipment shipping.

Shipping a New Holland CR9070 Combine from the USA to Argentina
How we exported a New Holland CR9070 to Argentina.
What Egyptian buyers need to check before buying used US farm equipment
Destination requirements should be checked before placing an offer, because they change both the total cost and the delivery timeline. For this purchase, three mattered most.
Advance cargo information. Egypt requires an ACID number, registered through the Nafeza platform, before goods ship. The buyer obtained it before the combine left Savannah, which avoided a hold at Alexandria.
Cleanliness. Used harvesting machinery can carry soil, seeds and plant residue. The combine was cleaned in the US so it would pass agricultural inspection on arrival.
Used-equipment rules, duties and timing. The buyer’s broker confirmed import eligibility for a used combine of this age and quoted duties and clearance time before the offer.
The result
The buyer found the rotary combine it needed in the US market, bought it for $139,500, and had it working near Ismailia before the wheat harvest.
| Result | Outcome |
|---|---|
| Purchase price | $139,500 (6% under asking) |
| Delivered cost before duties and taxes | $169,200 ($5,800 under budget) |
| Pickup to delivery | 38 days |
| Clearance at Alexandria | 4 days, no additional document requests or port storage charges |
| Additional cleaning requests | 0 |
| Condition on arrival | No transit damage reported |
| First season | About 1,600 feddans of wheat harvested, April to May 2026 |
What international buyers can learn from this purchase
Search beyond your local market. Large rotary combines are scarce in many countries. US inventory widened this buyer’s choice from a handful of machines to dozens.
Compare the machine, not the listing price. Year, hours, threshing wear and included headers decide value more than a few thousand dollars on the sticker.
Location matters. Two otherwise similar combines can differ by $3,000 to $4,000 in US inland transport alone.

Global Farm Equipment Price Index 2026: Trends, Export Costs, and Best Buying Regions
This guide provides a deep dive into global machinery pricing for 2026.
Check destination rules before you bid. Advance cargo filings, cleaning and inspections add cost and time if left until after purchase.
Estimate shipping before committing. The buyer set its offer around a shipping estimate, not the other way round.
Confirm exactly what is included. A header changes both the machine’s value and how many flat racks you pay for.
Buying similar equipment through JumboBee
- Find equipment. Browse current US listings by equipment type, manufacturer, model, price and location.
- Research and compare. Check model specifications and compare year, hours, condition, price and location across listings.
- Check shipping. Estimate international transportation before committing to a machine.
- Contact the seller or make an offer. Send an inquiry or use Instant Bid on the listing.
- Complete the purchase. Confirm the machine, transaction terms and required documents with the seller.
- Arrange international delivery. Coordinate transportation once the purchase is complete.
FAQ
Used Case IH 8120 combines are listed by US dealers and farms across the Corn Belt and Plains states. Browse current Case IH combine listings and filter by year, hours, price and location to compare machines side by side.
Price depends on year, engine and rotor hours, condition, included headers and the seller. Machines with low hours and a matching header sell at a premium. Check current Case IH 8120 inventory for live asking prices rather than relying on a single range.
Check year, engine and rotor hours, rotor and concave wear, feeder house, tires, hydraulics and included headers. Confirm the machine runs and drives. Then factor in its location, dimensions and the shipping cost to your destination.
Yes. International buyers can contact US sellers, make offers, and arrange payment and export transportation. Confirm transaction terms and documents with the seller, and check your country’s import rules before you commit.
Cost depends on the machine’s size and weight, its distance from a US port, whether it needs a flat rack, the destination port, and any headers shipped separately. Use the JumboBee shipping calculator for an estimate on a specific listing.
Yes. JumboBee’s shipping estimate lets you see likely international transport costs before you contact the seller or make an offer, so you can compare machines on total cost.
Generally yes, but requirements apply. Egypt requires advance cargo registration through Nafeza, and used harvesting equipment should arrive clean. Confirm eligibility, duties and inspection rules with a licensed customs broker before purchase.
Open the listing and send an inquiry to the seller, or use Instant Bid to submit an offer. Registration is required to complete an inquiry or bid.
Be the first to leave a comment
There are no replies to this post yet. Share your thoughts and help start the conversation.