All Heavy Equipment Models

Part Number BW15959. Front hitch hood guard attachment. Listed weight 47.5 lb (≈21.5 kg). Compatible with H480 Loader and 7R tractors with front hitch.

New take-off loader mounting frame attachment (serial BW16467) designed for John Deere 7R series tractors and H480 front-end loaders. Provides structural support for loader installation and evenly distributes operational forces. Listed as "NEW" in current inventory; status: On Yard; class: Used but unused take-off part. Stored in 1R inventory, location E Rack.

New old stock loader mounting frames with toolbox bracket. Designed for John Deere 563/673 loaders on 6000/6010/6020/6030 series and 6215/6415 tractors (4-cylinder models). Provides mounting interface for loader installation, evenly distributes operational forces, includes toolbox bracket support. SKU: BWA1379 (primary), BW15468 (frame component).

Mounting frame kit compatible with H240 and 520M loaders and 5E Series 3-cylinder FT4 tractors (generation 2019-present). Designed to evenly distribute forces and weight during loader operation.

Hood Guard Attachment for 700M Front Loader / 7R Tractors with H480 Loader

Backhoe Subframe Attachment/Mounting Kit for compact tractors

Carlisle 24x12.00-12 NHS (Non-Highway Service) tire, 2 PR. Overall diameter 591.8 mm, overall width 284.5 mm, loaded diameter 619.8 mm. Load capacity 675 lbs (≈306.2 kg) at 10 psi. Speed rating 20 km/h. Part/SKU 560366.

380/80R38 mm

Moil point chisel

Loader Bucket / 66IN construction bucket w/edge; new take-off C66 construction bucket for skid steer loader

New old stock (NOS) integral hitch mast assembly designed for John Deere flail shredders models 115, 118, 120, 200, 220, and 520. This is a replacement hitch mast component for mounting the shredders to tractors, typically used in agricultural shredding operations. No production year is explicitly stated in sources, but listed as compatible with 1990-2000 era equipment. No operational specs (e.g., power, speed) apply as this is a static hitch component.

Rear wheel weight designed to increase traction over rear axles and counterbalance front-end weights (e.g., loaders, front hitches, spray tanks). Cast iron construction. Maximum of two weights per wheel. Not compatible with wheels ≤61 cm (24 in.) or high clearance tires 230/95R48 136A8 R1W Radial. Requires additional hardware (e.g., R183851 bolts, qty 8); starter bolts not included.

Front weight support bracket (replacement for OEM R82549 / listed as R825498G). Holds up to 20 front weights. Fits many large-frame John Deere tractors (examples: 46/4840, 4555-4960 series). Approximate length 30 in (762 mm) with 14 in centers. OEM listing shows 153 lb (≈70.307 kg) weight.

Front suitcase-weight support bracket

NEW Remanufactured Selective Control Valve (SCV) for John Deere tractors. Compatible with models including 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1640, 2020, 2030, 2040, 2140, 2150, 2240, 2350, 2440, 2550, 2630, 2640, 2750, 2940, 2950, 7020. Part number: 203670 (serial examples: 2036701040SCV). Used for hydraulic remote control functions on tractors from the New Generation (1960s-1970s) and early 2x40 series (up to mid-1980s, aligning with 1965-1995 Gen1 range). No OEM power rating or flow specs found for the SCV itself (typically matches tractor hydraulics: ~20-30 L/min at 2000 PSI for compatible models). No official OEM dimensions or weight available in reviewed sources.

650/85R38 mm

1829 mm

SU22902

68.946 kg

14-17.5 mm

Not specified for the spindle; hydraulics requirements pertain to the grain cart or track system, not the spindle. (Unverferth track manuals show track assemblies being tensioned to 1000 psi using tractor hydraulics, with tractor SCV flow turned down to about 5 gpm — these are track tensioning values, not specifications for spindle 280240.)