All Heavy Equipment Models

0.8 cu(m)

4800 kg

4-in-1 bucket attachment. Bucket width: 72 inches (1828.8 mm). Compatible with 300/400/500 Series mount. Listing provides limited condition notes; detailed specifications not provided in source.

New take-off Category 2 (Cat 2) lift links sold as a matched pair (AL203849 and AL203850). Adjustable or fixed-length lower lift arms for 3-point hitch systems, designed for larger compact and mid-size tractors (compatible with Category 2 hitch geometry; pin diameters typically 28 mm / 1-1/8 inch for lower links). No official John Deere OEM dimensional or weight specifications were found in the cited dealer/marketplace listings.

MFWD (Mechanical Front-Wheel Drive) Axle Assembly without TLS (Traction Limiting System), rigid non-suspended front axle with hubs. Original part number AL215436 with 15.692 gear ratio.

Adjustment range (length) 645–844 mm (minimum 645 mm, maximum 844 mm). Shipping weight listed as 13.2 lb (≈6.0 kg). Product/packaging height listed as 1.9 in (≈48 mm) and width as 3.1 in (≈79 mm). Category Cat 2/2. End type: ball ends (1" ID). Finish: green. Lock type: spring lock. Compatible with various John Deere 6000-series models (examples: 6110, 6120, 6200, 6300, 6310, 6320, 6400 series) as cited in sources.

16' x 4 in 12 V truck auger (auxiliary loading auger; length 4877 mm; diameter 102 mm; 12 V)

520/85R38 mm

215 mm

1270 mm

John Deere original equipment manufacturer (OEM) Category 1 (Cat 1) center link assembly for 3-point hitch systems on compact utility tractors. Used to connect the top link of the tractor's 3-point hitch to compatible implements or stabilizers. Part number AM877776. Compatible with various John Deere compact tractors (e.g., 1-5 Series models post-2026 updates). Typically includes threaded ends for adjustability, ball joint connections, and Cat 1 pin compatibility (7/16" or 11mm pins). Not a full hitch; functions as adjustable top link bar.

The SmartBox® (Gen1) is a closed-transfer and electronically controlled metering system for precise, low-rate application of granular insecticides (e.g., for corn rootworm). It features a user-friendly controller with pre-programmed insecticide rate options (manually adjustable), metering units with integrated flow-sensing for accuracy, base containers installed in planter cradles, and compatibility with John Deere planters (e.g., 1770/1770NT models). Includes harness for tractor integration. Designed for safety with closed handling to minimize exposure. Supports as-applied mapping and diagnostics on controller display (earlier models may lack full touchscreen).

Snap-together fluted design for precise seed metering.

50-gallon (189 L) foam marker tank assembly with brackets, panels, fittings, and related components for John Deere 4720 (also listed for 4920 and 4930) self-propelled sprayers. Part number range AN302428-AN204428 indicates serial number applicability (e.g., for sprayers SN AN302428 and prior). Tank is used for foam marker system, must be vented prior to servicing (via cap relief valve or vent valve), and is filled with water and foam concentrate per operator instructions. Air pressure for foamer operation is regulated to a maximum of 103 kPa (1 bar / 15 psi).

13 x 46 mm

35 hp

3048 mm

Lifting capacity 1,250 lbs (567 kg); Fork length options 36 and 42 inches; Compatible with John Deere 100 & 200 series tractors; Frame material: high tensile, heavy-gauge steel; Tine feature: float capability (rigid option available).

Frontier AP10F pallet forks with fixed, mechanically adjustable Class I solid tines for John Deere compact utility tractors. Two fixed-position tine lengths are mentioned in the research: 36 in and 42 in. High-tensile, heavy-gauge steel frame with tines that can be locked rigid. The research also states compatibility with D120 and 120R series loaders and other 100/200 series compact tractors.

front_quick_hitch

Fixed tine pallet fork with 1,067 mm tine length and 30 x 80 mm tine section; two tines; frame load rating 907 kg; high-tensile heavy-gauge steel frame; floating tine capability with set screws to lock tines; compatible with John Deere 100, 200, and 300 series loader carriers; Class I solid tines.